baehr

1. 1
2. 2
3. 3
4. 4
5. 5
6. +

Available “NOW”

kwiKcover is convenient - the kwiKover unit is firmly attached to the rear of the motorcycle. When the bike is stopped simply unzip the bag, unroll the cover and attach the elastic straps in four places. Storing the cover is just as easy by reversing the process. No need to search for a location to store the kwiKover, even motorcycles without storage can be kwiKovered. Since the cover is so easy to use you are much more likely to do so to help keep sun, dust and light moisture off the seat, tank and instruments. The kwiKover is available in just one size and color, a black cordura bag with a metallic silver cover.

Several methods of installation are provided to mount the kwiKover bag the onto motorcycle. One patented method is to place the mounting flap between the seat and rear cowl. Locate the removable tube into a pocket that holds the cover and bag securely when the seat is installed and locked. Mounting straps are also provided for bikes whose seat design does not allow the above attachment method to be used. There are no hard surfaces on the bag or cover to scratch chrome or paint.

Storing the cover in the bag

There are a couple of suggested methods: 1) Fold the cover into thirds lengthwise then roll it from the handlebar end into the bag. 2) Fold the cover in half at the seat then into thirds lengthwise before rolling it into the bag.

Care of your kwiKover

The cover is made of a four-way stretch material. It can be stretched to about 40% to 50%. Stretching it farther or over sharp corners will degrade and/or possibly tear the material. The metallic cover will reflect some of the heat of the sun and is moisture repellant. The cover can be cleaned with a damp cloth. With careful use this cover should last several seasons. If the kwiKover lies against very hot engine parts damge to the cover may result.